Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Franklin Square, NY
We provide independent Lennox air duct cleaning across Franklin Square, and the thing that makes our Lennox work here different is this: in Franklin Square, the equipment is rarely the whole problem. Most of the Lennox air handlers and cased coils we open sit on original mid-century ductwork, so we read the cabinet and coil interface before anything gets cut or resealed. Call (844) 274-2194 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Franklin Square Residents Choose Us for Lennox Service
Franklin Square homeowners call us because we know Lennox equipment from the inside out, and because we know what an older Nassau County house does to it. Lennox builds its systems around matched coil-and-air-handler assemblies. On a Cape or split-level in Franklin Square, those assemblies are usually squeezed into closets and low-ceilinged basements, connected to duct runs that were never designed for the airflow a modern blower moves.
We don’t need factory authorization to work on your system. We’re an independent Lennox service provider, and we diagnose the model tag, the series and the duct-side airflow without leaning on a manufacturer badge.
What you get from us: quality parts that fit your Lennox cabinet and coil, clear scheduling, and a written estimate set per job before we start. Our technicians have up to 13 years of experience, and we use Rotobrush and Nikro equipment on every job – the same systems duct specialists rely on, not a shop vac with a hose adapter.
For local details, see our Franklin Square service page.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Franklin Square
Here’s what we actually find on Lennox systems in Franklin Square, and why the local housing matters in each case:
- Collapsed flex runs behind basement drop ceilings. Flexible supply and return runs off a Lennox air handler kink, sag or fully disconnect when they sit above paneled walls and drop ceilings in finished Franklin Square basements. The blower then works against high static pressure, and upstairs registers go weak. We pull the panel, reconnect the run and seal it with mastic.
- Mildew and lint in cased evaporator coils. Lennox cased coils sitting in damp finished basements collect dust and organic growth on the fins. That restricts airflow and pushes musty air into every supply register. Our evaporator coil cleaning covers the coil face, drain pan and the blower wheel behind it.
- Oversized air handlers on undersized original returns. A Lennox air handler sized for today’s load paired to a narrow 1950s return chase makes registers whistle and leaves second-floor rooms in Capes and splits swinging hot and cold. We measure and correct the return path, not the equipment.
- Airflow faults on variable-capacity blowers. Communicating Lennox systems trip static-pressure and airflow faults when ductwork leaks or crushes. Owners often blame the equipment. Usually the ductwork is the culprit, and no board replacement fixes a crushed trunk.
- Oil-era soot pulled through the system. Homes converted from oil heat still have soot residue in plenums and duct interiors. It migrates every time the blower runs. Full system cleaning lifts it out of the metal and off the components.
Clean ducts are only part of the solution – sealed, intact ducts are the other. That’s why our duct repair and sealing step runs alongside the cleaning on these jobs.
Lennox Service in Franklin Square: What Local Conditions Mean for Your Equipment
Franklin Square’s housing went up almost entirely between about 1946 and 1965, and that single fact changes how a Lennox job here plays out. A Lennox system in a Franklin Square Cape or ranch is a retrofit sitting on original galvanized trunk lines and oil-era plenums, not on new ductwork. That means crushed flex and disconnected runs hide behind basement drop ceilings, and soot from the old oil setup is often still coating the inside of the main trunk. Compare that to new-construction duct work further east on Long Island, where the runs are clean, sized and open to the eye.
In a typical Franklin Square Cape or split-level, a homeowner notices weak upstairs airflow and a musty smell from the Lennox air handler and calls for a cleaning. A qualified local pro pulls the basement drop ceiling, finds the original galvanized trunk with a collapsed flex branch and a lint-fouled cased coil, then cleans the coil and blower, reconnects and seals the run with mastic, and verifies static pressure before restarting the system. That’s the sequence here. Layer in Long Island’s humid winters and muggy summers, with the system cycling hard in both seasons, and damp basement ducts and coils fill up fast. Add spring pollen and fall leaf debris drawn through outdoor returns and the seasonal load is real.
Lennox Models & Products We Service in Franklin Square
We service the kinds of Lennox equipment that turn up in Franklin Square homes: air handlers and furnaces, cased evaporator coils, Merit Series condensing units and matching air handlers, Elite Series variable-capacity systems with communicating air handlers, Dave Lennox Signature Collection furnaces and outdoor units, plus Lennox Healthy Climate filtration and HRV/ERV accessories. We also handle full system cleaning, flex duct repair and evaporator coil cleaning on these setups.
When parts matter for fit and communication – like coils, gaskets and blower components – we go with OEM Lennox parts. For the duct shell itself, quality aftermarket flex, mastic and insulation do the job well. Every part is chosen to fit your cabinet and coil, not to match a catalog shelf.
Reread our Lennox expertise page if you want the deeper technical background.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Franklin Square
We price per job, not per vent, and the written estimate sets the final number before any work starts. A free estimate includes a look at the air handler, the coil, the visible trunk lines and whatever sits behind accessible drop ceiling panels.
What drives cost on a Lennox job in Franklin Square: the size and layout of the system, how much of the ductwork is accessible, whether flex runs need reconnecting and sealing, and whether coil cleaning is part of the visit. A typical cleaning visit on a whole system runs within a range we’ll confirm in writing. What we don’t do is quote a teaser price over the phone and then build a bigger invoice once we’re on site.
Call (844) 274-2194 for an exact quote on your Lennox system – estimates are free.
Serving Franklin Square, NY – Our Local Coverage Area
We serve Franklin Square and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Franklin Square
Usually no, because technicians work through existing access panels and pull only the tiles or panels needed to reach the trunk. In most Franklin Square basements, the drop ceiling is the access point rather than an obstacle, and panels go back in place after the work. If a panel is damaged or missing, we’ll flag it before we start.
Because summer humidity is when mildew grows on a damp evaporator coil and in the basement duct runs feeding it. Long Island’s muggy cooling season keeps those surfaces wet for weeks, and a lint-fouled cased coil in a finished basement is the usual source. Coil cleaning and sanitizing address it at the source.
Yes. A crushed or disconnected flex run raises static pressure, and a variable-capacity Lennox blower reads that as an airflow problem and throws a fault. The equipment is usually fine; the duct is the issue. We measure static pressure, find the restriction and repair the duct before recommending any equipment work.
It does. Oil-era soot often sits inside plenums and trunk lines long after the conversion, and it migrates through the system every time the blower runs. Full system cleaning lifts that residue out of the metal and off the components. Call (844) 274-2194 to book an assessment.
Clean first, and repair the duct shell, unless the metal itself is failing. In most 1950s Franklin Square homes, the original galvanized trunk is sound and the real problems are crushed flex, disconnected runs and rotted insulation. Replacing equipment rarely fixes an airflow problem caused by ducts. Call (844) 274-2194 for a free estimate.
Service Areas Near Franklin Square
We also serve homeowners in nearby towns across Nassau and Queens, including Garden City South, Herricks, New Hyde Park and Manhasset, plus our Malverne and Garden City Park coverage. If you’re just outside Franklin Square, call and we’ll confirm we cover your street.
Book Your Lennox Service in Franklin Square Today
Ready to get your Lennox system cleaned and its ductwork sealed properly? Call (844) 274-2194 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, the price is set per job in writing, and you’ll see before-and-after photos of your own ducts when we’re done.
Written by the team at Forest Hills Air Duct Cleaning.